Manufacturers of the ClassicColumn Decorative PVC Pipe Column System
IMAGINE HOW SIMPLE IT CAN BE FOR BUILDERS AND CONTRACTORS TO USE AND IMPLEMENT LOW COST MAINTENANCE FREE COLUMNS INTO HOMES AND PROJECTS
Create Columns with Caps & Bases that fit PVC WATER PIPE!
PRICED RIGHT: projects large or small
VERSATILE: size & height for any application
PVC Columns you can install as easy as:
1.
Decide on you Column diameters and purchase your Caps and Bases.
2.
Order the correct pipe size locally. (lengths are available up to 20ft.!)
3.
Prime (with KILZ), paint & finish as desired! (no sanding required)
Decorative Tuscan Style Caps and Bases made to fit IPS and SDR35 PVC pipe
This decorative architectural Column System has been designed as a lower priced column for applications where standard architectural or decorative columns and porch posts may be specified yet not affordable. It is also a perfect method of covering and hiding basic structural supports.
30 - 70% LOWER COST THAN OTHER DECORATIVE AND ARCHITECTURAL COLUMNS
The Pipe Column System is ideal for residential, light commercial, and remodelling applications.
Caps and Bases ship easily by Fed Ex or UPS
Classic Column
"Features and Benefits"
Classic Column is 30% to 70% less than other Columns
Cost Savings in Installation.
(as simple as gluing and screwing into place)
Cost Savings in Finishing.
(simply clean with alcohol cleaner, prime and paint)
Buy the pipe in 13' or 20' lengths locally and the Caps and Bases from the Dealer.
Pipe shafts can be quickly adjusted to any height on site from as short as specified up to 20'.
Classic Column can be installed early on site to avoid splitting and reconstructing later.
They can be used in the interior or on the exterior of Starter homes, High end homes, Single and Multi-family as well as on Remodel and Commercial projects.
Applications are endless from exterior landscapes, arbors, and gazebos to porches and decks as well as a multitude of entrance features. The 6” is an elegant addition to interior pony walls and at the end of counter tops. The larger 8", 10" & 12” work great in any typical column application.
Classic Columns are larger than other columns because of the straight shaft and full nominal sizes. For example: the 8 5/8 ” has the appearance of a fiberglass 10” that is typically 9 1/2 ” at the bottom tapering to 8 1/2 ” at the top. (A typical Fiberglass 8" is 7 1/2" tapering at 6 5/8" at the top)
Call for information and pricing on (CUSTOM DECORATIVE CAPITALS)
Column shafts are not load bearing, but the hollow core does allow for the installation of structural supports. (Wood, Steel or Concrete)
PVC PIPE & Classic Column Cap & Base sizes available
Cap & Base Code
Hole size
PVC Water pipe code
Cap & Base Code
Hole size
PVC Sewer pipe code
CC 7 IPS
6 ⅝"
6" Sch.40/ SDR41
CC 7 SDR35
6 ⅜"
6" SDR35
CC 9 IPS
8⅝"
6" Sch.40/ SDR41
CC 9 SDR35
8.4"
8" SDR35
CC 11 IPS
10¾"
8" Sch.40/ SDR41
CC 11 SDR35
10 ½"
10" SDR35
CC 13 IPS
12¾"
12" Sch.40/ SDR41
CC 13 SDR35
12 ½"
12" SDR35
IPS pipe usually sold in 20' lenghts
SDR35 pipe usually sold in 13' or 15' lenghts
Classic Essentials in Moulding
(Classic Column Manufacturer)
2244 Douglas Road,
Burnaby, British Columbia
CANADA V5C 5A7